chloro-dimethyl-[2-[methyl(dioctyl)silyl]ethyl]silane

chloro-dimethyl-[2-[methyl(dioctyl)silyl]ethyl]silane - Names and Identifiers

Name	(chloro-ethyl-methyl-silyl)methyl-methyl-dioctyl-silane
Synonyms	LogP 2-(Di-N-Ctylmethylsilyl)Ethyldimethylchlorosilane 2-(DI-n-OCTYLMETHYLSILYL)ETHYLDIMETHYLCHLOROSILANE chloro-dimethyl-[2-[methyl(dioctyl)silyl]ethyl]silane [Methyl(Dioctyl)Silyl]Methyl Ethyl Methyl Chlorosilane Chloro(Ethyl)Methyl{[Methyl(Dioctyl)Silyl]Methyl}Silane (chloro-ethyl-methyl-silyl)methyl-methyl-dioctyl-silane
CAS	475213-03-7
InChI	InChI=1/C21H47ClSi2/c1-6-9-11-13-15-17-19-23(4,21-24(5,22)8-3)20-18-16-14-12-10-7-2/h6-21H2,1-5H3

chloro-dimethyl-[2-[methyl(dioctyl)silyl]ethyl]silane - Physico-chemical Properties

Molecular Formula	C21H47ClSi2
Molar Mass	391.22
Boling Point	165-166°C / 0.1
Flash Point	>110°C (>230°F)
Specific Gravity	0.859
Sensitive	8: reacts rapidly with moisture, water, protic solvents

chloro-dimethyl-[2-[methyl(dioctyl)silyl]ethyl]silane - Introduction

(chloro-ethyl-methyl-silyl)methyl-methyl-dioctyl-silane is an organosilicon compound with the chemical formula C16H36ClSi2. It is a colorless and transparent liquid with a special silicon-oxygen bond, stable chemical properties, not easy to hydrolyze, low surface tension and good heat resistance.

(chloro-ethyl-methyl-silyl)methyl-methyl-dioctyl-silane is commonly used in organic synthesis in the silicidation reaction and the preparation of organic-inorganic materials. It can be used as a silicon-based monomer to participate in polymerization reactions for the preparation of silicone, silicone cross-linked polymers and coatings.

The preparation method of the compound is mainly through the reaction of di-n-octyl silyl methanol and dimethyl dichlorosilane, and ethyl aluminum chloride. The preparation process needs to be carried out under inert gas protection to ensure the purity of the reactants and prevent unnecessary risks.

in the use and storage (chloro-ethyl-methyl-silyl)methyl-methyl-dioctyl-silane, need to pay attention to the following safety information: avoid contact with skin and eyes, if accidentally contact, should immediately rinse with plenty of water. Due to its low volatility, it is recommended to operate in a well-ventilated place to avoid inhalation of gases. At the same time, keep away from fire and high temperature objects to avoid fire and explosion. When disposing of waste, it must be disposed of in accordance with relevant regulations and must not be dumped into sewers or the environment.

Last Update：2024-04-10 22:29:15